Concrete Tools
Sold Out
Clevis Style Lug Bolts to Broom Broom Bracket
Cut out section of adapter fits over broom bracket
Adjustable angle, accepts broom threaded handle
Clevis Style Lug Bolts to Broom Broom Bracket Cut out section of adapter fits over broom bracket Adjustable angle, accepts...
Sold Out
This 96" lightweight aluminum threaded bull float handle has a 1-3/4" diameter. Molded threaded plugs in each end join multiple handles together for extended reach. This handle fits on bull floats and fresnos with the the Single-Tilt Action Threaded Bracket Assembly (CC800). This handle can also be used with Kraft double tilt action float brackets with an adapter. Proudly made in the USA.SAFETY FIRST: Metal handles should not be used near electrical wires.
Lightweight aluminum handle
Molded thread plug joins multiple handles together
Use with Single-Tilt Action Threaded Brackets (CC800)
Combine with an adapter for use with Double-Tilt Action Brackets
Item ID
CC238
Weight
3.80 LB (1.72 kg)
Length
8 ft. (2.4384 m)
Diameter
1-3/4 in. (4.4450 cm)
Material
Aluminum
Color
Silver
Package Contents
Handle
Handle
Threaded Bull Float
Handle Material
Aluminum
Handle Length
8 ft. (2.4384 m)
This 96" lightweight aluminum threaded bull float handle has a 1-3/4" diameter. Molded threaded plugs in each end join multiple...
Sold Out
Tighten Handle to Lock in Angle Adapts Clevis Style Lug to Threaded Broom Handles Adapter
Cut out section of adapter fits over broom bracket
Adjustable angle, accepts broom threaded handle
Tighten Handle to Lock in Angle Adapts Clevis Style Lug to Threaded Broom Handles Adapter Cut out section of adapter...
Sold Out
Use With 1-3/8in or 1-3/4in Button Handles Fits All 2 of 4 Hole Configurations Orbiter Tilt Bracket
Quick & easy turning action
Pitch of float blade controlled by turning handle
Item ID
CC270
Weight
2.60 LB (1.18 kg)
Use With 1-3/8in or 1-3/4in Button Handles Fits All 2 of 4 Hole Configurations Orbiter Tilt Bracket Quick & easy...
Sold Out
Fits All 4in Spacing Fresnos and Brooms Fresno/Broom Bracket
Attach to single action fresno or broom to lock the handle at the best angle
Use with 1-3/4" and 1-1/4" threaded handles
Fits All 4in Spacing Fresnos and Brooms Fresno/Broom Bracket Attach to single action fresno or broom to lock the handle...
Sold Out
Fresno Trowel Adapter
Expand the use of your bull float handles with this strong, yet lightweight cast aluminum adapter connects to clevis handles brackets for use with Threaded Bull Float Handles. Attaches with included bolt and wingnut to most fresnos, brooms, walking edgers and groovers. The wingnut makes attaching to brackets quick and easy. Proudly made in the USA. CAUTION: Metal extension handles should not be used near electrical wiring.
Strong Cast Aluminum for long life
Adapts Clevis Brackets to fit Threaded Bull Float Handles
Fits fresnos, brooms, walking edgers and groovers
Fresno Trowel Adapter Expand the use of your bull float handles with this strong, yet lightweight cast aluminum adapter connects...
Sold Out
EZY-Tilt® II BracketThe EZY-Tilt® II double tilt action button float bracket attaches to fresnos or bull floats. The bracket is made of rugged, yet lightweight aluminum for durability. Control the pitch of the blade with a one-to-one turning ratio of handle to blade. Turning the handle eliminates the need for bending and lifting when moving tools across fresh concrete. Chain secures the bracket and eliminates over extension of the bracket. Use with 1-3/8" or 1-3/4" snap/button bull float brackets. Only fits 2- or 4-hole metal bull floats. Proudly made in the USA.
One-to-one turning ratio of handle to pitch of blade.
Chain eliminates potential overextension of the bracket
Double tilt action achieved with the handle to eliminate bending and lifting
Fits 1-3/8 In or 1-3/4 In. button bull float handles.
EZY-Tilt® II BracketThe EZY-Tilt® II double tilt action button float bracket attaches to fresnos or bull floats. The bracket is...
Sold Out
eigh-Lite Broom Bracket
Item ID
CC160
Weight
0.30 LB (0.14 kg)
Handle
Not Included
eigh-Lite Broom Bracket
Item ID
CC160
Weight
0.30 LB (0.14 kg)
Handle
Not Included
Sold Out
This 72" lightweight aluminum button bull float handle features a 1-3/4" diameter for easy handling. Blue anodized aluminum prevents hands from turning black caused by oxidation. Swaged design fits multiple handles together without extra inserts. The nesting design secures the handle to brackets and other handles for an extended reach. A double button clip (CC289-01) is attached to each handle to connect to brackets or other handles. This snap handle fits easily on any Kraft double tilt action float brackets (Kraft Tool #CC270, #CC290, #CC294, and #CC296) , or single tilt bracket (Kraft Tool #CC696 and #CC697). This handle can also be attached to clevis brackets with an adapter (Kraft Tool # CC295 or #CC332). Proudly made in the USA.SAFETY FIRST: Metal handles should not be used near electrical wires. Made from lightweight aluminum Anodized aluminum prevents hands from turning black from oxidation Swaged design nests multiple handles together without extra...
This 72" lightweight aluminum button bull float handle features a 1-3/4" diameter for easy handling. Blue anodized aluminum prevents hands...
Sold Out
This 72" lightweight aluminum threaded bull float handle has a 1-3/4" diameter. Molded threaded plugs in each end join multiple handles together for extended reach. This handle fits on bull floats and fresnos with the the Single-Tilt Action Threaded Bracket Assembly (CC800). This handle can also be used with Kraft double tilt action float brackets with an adapter. Proudly made in the USA.SAFETY FIRST: Metal handles should not be used near electrical wires.
Lightweight aluminum handle
Molded thread plugs join multiple handles together
Use with Single-Tilt Action Threaded Brackets (CC800)
Combine with an adapter for use with Double-Tilt Action Brackets
Item ID
CC236
Weight
2.60 LB (1.18 kg)
Length
72 in. (182.88 cm)
Diameter
1-3/4 in. (4.4450 cm)
Material
Aluminum
Package Contents
Handle
Handle
Threaded Bull Float
Handle Material
Aluminum
Handle Length
72 in. (182.88 cm)
This 72" lightweight aluminum threaded bull float handle has a 1-3/4" diameter. Molded threaded plugs in each end join multiple...
Sold Out
This fluted silicon carbide rub brick makes dressing down concrete fast and easy. The fluted brick is on a diagonal, which provides sharp edges to help with stubborn materials while carrying away the excess debris. Attached to a contoured plastic handle to minimize fatigue. Preferred by finishers for its ease of use. The 1" thick 20 grit rub brick smooths out concrete to a fine finish. A popular tool to create a smooth professional finish on block walls, wet tile, and concrete, especially excess cement from forms. The favorite tool for decorative concrete prep and applications. Proudly made in the USA. Use to dress down,smooth, and remove form marks from concrete Preferred by finishers for fast and easy concrete smoothing Fluted for better coverage and to move debris out of way Contoured plastic handle Item ID CF283 Weight 1.60 LB (0.73 kg) Length 6 in. (15.24 cm) Width 3 in....
This fluted silicon carbide rub brick makes dressing down concrete fast and easy. The fluted brick is on a diagonal,...
Sold Out
100% Bronze Groover. A unique longest wearing one-piece casting won't wear out with extended use in concrete like steel edgers. Each blade is hand polished for a smooth professional finish every time. This 6" x 2-3/4" edger creates a 1/4" radius on the edge of concrete slabs with a 5/8" lip to prevents the edges from chipping with wear. The ends are turned up along the edges of the tool eliminating the possibility of gouging of the cement while forming the edge. The narrow 2-3/4" width lets the user get in tight spaces. The smooth wood handle is secured to the casting. Proudly made in the USA. Long-wearing single-piece bronze edger Prevent chipping of slabs with a smooth radius Makes 1/4" radius edge with 5/8" lip Special turned up ends to eliminate gouging of concrete Item ID CF311 Weight 1.30 LB (0.59 kg) Length 6 in. (15.24 cm) Width 2.75...
100% Bronze Groover. A unique longest wearing one-piece casting won't wear out with extended use in concrete like steel edgers....
Sold Out
100% Bronze Groover. A unique longest wearing one-piece casting won't wear out with extended use in concrete like steel edgers. Each blade is hand polished for a smooth professional finish every time. This 6" x 2-3/4" edger creates a 1/4" radius on the edge of concrete slabs with a 5/8" lip to prevents the edges from chipping with wear. The ends are turned up along the edges of the tool eliminating the possibility of gouging of the cement while forming the edge. The 2-3/4" width lets the user get in tight spaces. The comfortable ProForm® soft grip handle is secured to the casting. The enhanced texture on the handle reduces fatigue and provides a great grip even when wet. The signature orange and black handle is easy to find on a jobsite. Proudly made in the USA. Long-wearing single-piece bronze edger Prevent chipping of slabs with a smooth radius Makes...
100% Bronze Groover. A unique longest wearing one-piece casting won't wear out with extended use in concrete like steel edgers....
Sold Out
3/8" Deep Bit, 5/16" Wide Bit, 1/4" R
100% Bronze, cuts smooth clean grooves
Item ID
CF260PF
Weight
1.30 LB (0.59 kg)
Length
5.5 in. (13.970 cm)
Width
3 in. (7.62 cm)
Radius
1/4 in. (0.6350 cm)
Bit Depth
3/8 in. (0.95250 cm)
Bit Width
5/16 in. (0.793750 cm)
Material
Bronze Blade; ProForm® Handle
Finish
Hand Polished
Package Contents
Groover
Blade Material
Bronze
Blade Length
5.5 in. (13.970 cm)
Blade Type
Groover
Handle
ProForm® (CF047PF)
Handle Material
ProForm® Soft Grip
Handle Length
4.5 in. (11.430 cm)
3/8" Deep Bit, 5/16" Wide Bit, 1/4" R 100% Bronze, cuts smooth clean grooves Item ID CF260PF Weight 1.30 LB...
Sold Out
Clevis Style HandleThis 5' quality wood handle features a steel clevis. The steel clevis provides a tight grip to clevis brackets. The clevis is attached to the smooth hardwood handle with a steel ferrule. Use with fresnos and walking tools such as curb tools, edgers and groovers. Proudly made in the USA.
Steel clevis is long-wearing
Steel ferrule for strength
Use with fresnos without an adapter
Use with long handle bronze or stainless steel tools
Clevis Style HandleThis 5' quality wood handle features a steel clevis. The steel clevis provides a tight grip to clevis...
Sold Out
Level and smooth a large area of concrete before finishing with this lightweight bull float. Made of Genuine Extru-Lite™ Magnesium, which is 30% lighter than aluminum. The float features multiple ribs for extra strength and reinforced for long wear. This 48" x 8" round end float is "broken-in," curved and properly balance to prevent digging. The rounded ends keeps the float from digging into the surface while floating the cement. Each bull float is painted for longer wear. Designed for use with 4-hole brackets (sold separately). Kraft Tool's Double-Tilt Action Brackets (#CC270, #CC290, #CC294, and #CC296) or Single-Tilt Action Brackets (#CC696 or #CC800) are popular choices for brackets. Handle choices are determined by the user's choice in bracket. Proudly made in the USA. Made of Magnesium, lightweight and longer lasting than aluminum alloy Float blade is "broken-in", curved and balanced to prevent digging Item ID CC803-01 Weight 7.90 LB (3.58...
Level and smooth a large area of concrete before finishing with this lightweight bull float. Made of Genuine Extru-Lite™ Magnesium,...
Sold Out
Dual Edge Channel Float
Rounded front edge for floating
Square 90 degree back edge for finishing
Dual Edge Channel Float
Rounded front edge for floating
Square 90 degree back edge for finishing
Sold Out
This complete 4-hole bracket assembly is uniquely designed to adjust 180° degrees to go back and forth along a job. The toothed bracket tightens to set and keep a desired angle. The bracket is made of cast aluminum for long wearing use. Use with 1-1/4", 1-1/2", or 1-3/4" threaded bull float extension handles. Use with a threaded bracket to button handle adapter for more versatility. Proudly made in the USA.
Handle socket adjusts 180° to desired angle
Bracket has teeth to keep handle at a set angle
Fits 1-1/4 In., 1-1/2 In., or 1-3/4 In. threaded bull float handles
Attaches to 4-hole bull floats
Item ID
CC800
Weight
1.70 LB (0.77 kg)
Handle
Not Included - Use with Threaded Bull Float Handles
This complete 4-hole bracket assembly is uniquely designed to adjust 180° degrees to go back and forth along a job....
Sold Out
3-1/4in Bristles Concrete Finishing Broom
Soft, plastic bristle, designed to give a fine finish on newly poured concrete
Long wearing bristles are set solidly in wood
3-1/4in Bristles Concrete Finishing Broom Soft, plastic bristle, designed to give a fine finish on newly poured concrete Long wearing...
Sold Out
Concrete Rake
Favored for its ease in moving concrete
Comes w/ 54" wood jam handle
Ships unassembled
Concrete Rake
Favored for its ease in moving concrete
Comes w/ 54" wood jam handle
Ships unassembled
Sold Out
Soft, horsehair bristle, designed to give a soft, fine finish on newly poured concrete
Long wearing bristles are set solidly in wood
Item ID
CC193-01
Weight
1.50 LB (0.68 kg)
Length
24 in. (60.96 cm)
Handle
Not Included - Use with Broom Thread Handle or Adapter
Trim Material
Horsehair
Trim Length
2.5 in. (6.350 cm)
Soft, horsehair bristle, designed to give a soft, fine finish on newly poured concrete Long wearing bristles are set solidly...
Sold Out
Made of 12 gauge, cold rolled steel
Blade measures 20" x 5"
Item ID
CC902A
Weight
5.80 LB (2.63 kg)
Length
20 in. (50.80 cm)
Width
5 in. (12.70 cm)
Thickness
0.104 in. (0.26416 cm)
Hook
Yes
Blade Material
#12 Gauge Cold Rolled Steel
Blade Length
20 in. (50.80 cm)
Handle
Ferruled with Hook (CC902-02)
Handle Material
Wood
Handle Length
60 in. (152.40 cm)
Made of 12 gauge, cold rolled steel Blade measures 20" x 5" Item ID CC902A Weight 5.80 LB (2.63 kg)...
Sold Out
Protect your knees while finishing concrete, laying down tile or other flooring material, landscaping, auto repair, mechanical work, or any other job that involves extended floor work. These lightweight, yet durable knee pads can be used for all types of construction. Each pad is molded in one piece to eliminate seams that can lead to chafing and discomfort. Knee pads are made of durable, lightweight polyurethane with two adjustable web straps to hold pads to knees. Replacement straps are available. Knee pads fit Deluxe Heavy-Duty Stainless Steel Knee Boards ( CC150, CC151), Lightweight Stainless Steel Knee Boards (CC162), and Concrete Sliders (CC153) to create a "comfort fit" for the sliders. Proudly made in the USA.
Made of lightweight, durable polyurethane
Molded in one-piece
2 replaceable straps hold pad to knee
Made in the USA
Item ID
WL080
Weight
1.40 LB (0.64 kg)
Material
Polyurethane
Color
Black
Protect your knees while finishing concrete, laying down tile or other flooring material, landscaping, auto repair, mechanical work, or any...
Sold Out
Complete 2 Hole Bullfloat Bracket
Handle socket fits all 1-1/4", 1-1/2" or 1-3/4" threaded extension handles
Complete 2 Hole Bullfloat Bracket
Handle socket fits all 1-1/4", 1-1/2" or 1-3/4" threaded extension handles
Sold Out
Magnesium Screed Made with of Genuine Extru-Lite™ magnesium which is 30% lighter than similar aluminum screeds. Quality material won't rust extending the life and use of tool. This screed are built for strength and rigidity, but lightweight enough for the largest of jobs. The 12' screed is easy to move along forms on large slab projects. The 1-1/2" x 3-1/2" "easy grip" size is comfortable to hold while hand screeding. Thicker walls make up the 1-1/2" side of the screed to meet our uncompromising standards in holding its shape. Plastic end caps extend the life of the tool by eliminating the opportunity for concrete and other materials to build-up within the screed. Popular for leveling material in concrete paving and landscape work. Proudly made in the USA. Must ship via truck due to length. Made of Genuine Extru-Lite Magnesium - 30% lighter than aluminum Built for strength and rigidity Quality material...
Magnesium Screed Made with of Genuine Extru-Lite™ magnesium which is 30% lighter than similar aluminum screeds. Quality material won't rust...
Sold Out
Replacement Male Thread Plug for handles and adapters. A strong cast aluminum male threaded end creates a strong attachment to bull floats, fresnos and other threaded handles and brackets. The threads are uniquely designed to allow connections to both bull float handles and brackets as well as broom thread brackets. The threaded ends are molded for strength and consistency in threads. The plug is 1-3/4 In. in diameter. Attach the plug to a bracket and use as a hand tool if desired.
Cast aluminum construction
Molded threads for consistency
1-3/4 In. diameter
Fits Threaded Bull Float Handles
Item ID
CC224-02
Weight
0.40 LB (0.18 kg)
Handle Material
Cast Aluminum
Replacement Male Thread Plug for handles and adapters. A strong cast aluminum male threaded end creates a strong attachment to...
Sold Out
Expand the use of your tools with this adapter! All your concrete tools can use the same button bull float handle or threaded bull float handle with this adapter. This tool allows finishers to use lightweight 1-3/4 In. diameter button bull float handles with threaded bracket assemblies. Or flip the adapter around to connect threaded bull float handles with the popular double tilt brackets. The 1-3/4 In. diameter button end fits on all of the Kraft Tool Double-Tilt brackets to use with Threaded Bull Float Handles. A strong aluminum male threaded end creates a strong attachment to bull floats, fresnos and other threaded handles and brackets. The threaded end is secured to a lightweight durable aluminum tube with holes to accept 1-3/4 In. button bull float handles with double button clips. The threaded end is cast aluminum for a strength and consistency in threads. Proudly made in the USA. Use...
Expand the use of your tools with this adapter! All your concrete tools can use the same button bull float...
Sold Out
Expand the use of your tools with this adapter! All your concrete tools can use the same button bull float handle or threaded bull float handle with this adapter. This tool allows finishers to use lightweight 1-3/4 In. diameter button bull float handles with threaded bracket assemblies. Or flip the adapter around to connect threaded bull float handles with the popular double tilt brackets. The 1-3/4 In. diameter button end fits on all of the Kraft Tool Double-Tilt brackets to use with Threaded Bull Float Handles. A strong aluminum female threaded end creates a strong attachment to threaded handles. The threaded end is secured to a lightweight durable aluminum tube with holes to accept 1-3/4 In. button bull float handles with double button clips. The threaded end is cast aluminum for a strength and consistency in threads. Proudly made in the USA. Use the same handle for all your tools!...
Expand the use of your tools with this adapter! All your concrete tools can use the same button bull float...